Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 53)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 51
Drive Terminal Application Chapter 4
Home Setup
The Home setup screen ( Figure 49 ) changes the information found on the Home
screen. From this screen, the name of the drive can be changed. The parameters
assigned to the four meters on the screen can be modified along with the
associated text for the meters.
Figure 49 - Home Setup
To change the drive name:
1. Click the data field associated with Drive Name.
2. Edit the name of the drive and press enter.
To change the parameter associated with a meter:
1. Select the desired Meter.
2. Press the Parameter column header (see Assign a Parameter on page 43 ).
To change the name associated with a meter:
1. Select the desired Meter.
2. Press the Text column header to open a dialog in which the meter name
can be edited.
3. Press Enter to exit.
TIP Pressing the Default push button will assign all four meters to the default
parameters and default names.
Text associated with a meter is stored within the drive and does not change
when an alternative language is selected.