Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 41)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 39
Drive Terminal Application Chapter 4
To change the value of the parameter:
1. Select the New Value pulldown menu.
2. Select the new value which will be displayed in the ‘New Value’ field.
The Default button selects the default value for the ‘New Value’ field.
3. Press the ‘Apply’ or ‘OK’ button.
To leave the dialog without applying the new value, press Cancel.
Figure 34 - Edit Enum Parameter
Read Only Parameters
Read only dialogs ( Figure 35 ) are similar to those used to edit a parameter, but
lack the editing controls.
Figure 35 - Read Only Parameter