Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 123)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 123
Cerabar S Pressure Transmitter Appendix H
Configure a Cerabar S
Pressure Transmitter You can configure the device via the local display and menus on the instrument.
On the local display of the field instrument, use the Quick Setup menus to
configure instrument parameters.
Pressure Measuring Mode
Level Measuring Mode
1)
1) 1)
2)
1) Display via on-site display only
2) Display via FieldCare
and HART handheld terminal onl y
Gauge pressure sensors Absolute pressure sensors
SET LR V
SET UR V
POS . ZERO ADJUST
DAMPING VALUE
POS . I NPUT VA LU E
Pressure Level
OPERATING MENU
Measured value
GR OUP SELECTION
LANGUAGE MEASURING MODE QUICK SETUP
MEASURING MODE
1)
1) 1)
2)
1) Display via on-site display only
2) Display via FieldCare
and HART handheld terminal onl y
Gauge pressure sensors Absolute pressure sensors
SET LR V
SET UR V
POS . ZERO ADJUST
DAMPING VALUE
POS . I NPUT VA LU E
Pressure Level
OPERATING MENU
Measured value
GR OUP SELECTION
LANGUAG E MEASURING MODE QUICK SETUP
MEASURING MODE