Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 80)

80 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 5 Visualization
You might have to expand the program if the tag is program scoped.
6. Select the same tag for the second parameter as had been selected for the
first.
Return to the Global Object Parameter Values window, edit the value field
for the second parameter, and leave just the path to the tag.
7. Click on the value field for the fifth parameter and enter the value 2.
This value causes a smaller, ‘Quick’ faceplate to appear, which can be
expanded to the full faceplate.