Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 60)

60 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 5 Visualization
Instruction becomes the link from the actual instrument to the faceplate on the
graphic.
Download the Add-On Instructions
For the latest compatible software information and to download the PlantPAx
Library, see the Product Compatibility and Download Center at
http://www.rockwellautomation.com/rockwellautomation/support .
(Log-in required).
Add-On Instruction Description
I_AB56IF8H Structured input data for each HART 8 channel input module.
The I_AB56IF8H Add-On Instruction collects and organizes data from module parameters and from a module query
that provides extra HART data via a CIP message from the controller to the I/O module.
I_AB56IF16H Structured input data for each HART 16 channel input module.
The I_AB56IF16H Add-On Instruction collects and organizes data from module parameters and from a module query
that provides extra HART data via a CIP message from the controller to the I/O module.
I_AB56FxHChan Structured data for each instrument.
The I_AB56IFxH_Chan Add-On Instruction takes specific data from each channel and point and arranges it for the
P_AIn56H Add-On Instruction. The I_AB56IFxH_Chan Add-On Instruction deciphers and prioritizes the HART
Command 48 diagnostic message and sends the highest priority message (numerically) to the P_AIn56H Add-On
Instruction.
P_AIn56H Send the analog and process variable values from each instrument to one or more faceplates.
The P_AIn56H Add-On Instruction uses embedded P_MODE and P_ALARM Add-On Instructions.
The P_AIn56H Add-On Instruction not only organizes data in a similar fashion as other PlantPAx operator interfaces but
it organizes the data so operators can expect interaction to remain the same throughout the HMI.
IMPORTANT The P_AIn_HART Add-On Instruction uses embedded P_MODE and P_ALARM
Add-On Instructions. These embedded Add-On Instructions must already be in
the project before importing the P_AIn_HART Add-On Instruction.