Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 21)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 21
Chapter
2
Configure the HART Device in RSLogix 5000
Programming Software
The examples in this chapter use RSLogix 5000 programming software,
version 20.
Configure a HART Input
Module in a ControlLogix
System In RSLogix 5000 software, you must have a project open with a ControlLogix
controller already configured. Make sure the project path is set to the correct
controller.
Use RSWHO Active in RSLogix 5000 software to verify that the controller,
HART input module, and devices are active.
Topic Page
Configure a HART Input Module in a ControlLogix System 21
Configure a HART Input Module in a Compact I/O System 27
Configure a HART Input Module in a FLEX I/O System 29
Configure a HART Input Module in a POINT I/O System 31