Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 9)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 9
Preface
The tested HART devices are the following:
• Promass 83 flowmeter
• Promag 53 flowmeter
• Proline t-mass 65 flowmeter
• Prosonic S transmitter
• Prowirl 73 flowmeter
• Levelflex M guided level-radar
• Micropilot M level-radar
• Prosonic M ultrasonic level
• Liquiline M CM42 transmitter
• Cerabar S pressure transmitter
• Deltabar S differential pressure
• iTEMP TMT162 temperature transmitter
• iTEMP TMT182 temperature transmitter
The ControlLogix platform provides a full range of input and output modules to
span a wide variety of applications. The ControlLogix architecture uses
producer/consumer technology, allowing input information and output status to
be shared by all ControlLogix controllers in the system.
1 0 Relay
Output
Module Status Network Status
1734
OW4
NODE:
1 1
3
0
2 5
7
4
6 1
3
0
2
120 VAC Input
Module Status Network Status
1734
IA4
NODE:
1
3
0
2 1
3
0
2
220 VAC Input
Module Status Network Status NODE:
1
3
0
2
1734
IM4
1
3
0
2
24VDC
Sink
Input
Module Status Network Status
1734
IB8
NODE:
1
3
0
2 5
7
4
6
RUN REM PROG
LINK 1 LINK 2 NS
SD
RUN FORCE I/O OK
XX:XX:XX:XX:XX:XX
L33ERM
1 (Front)
2 (Rear)
RELAY 115 VAC AC/DC OUT
Integrated Asset Management
Process Automation
System Server (PASS)
Operator
Workstation (OWS) Engineering
Workstation (EWS)
POINT I/O
System
CompactLogix
System
ControlLogix
System
FLEX I/O System