Configure a flex i/o module – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual

Page 50

Advertising
background image

50

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014

Chapter 3

Configure the HART Device in FactoryTalk AssetCentre Software

Configure a FLEX I/O Module

1. From the DTM Networks tree, select the FLEX rail.
2. Click Add DTM.

3. Select the FLEX I/O module and click OK.

The tree should look similar to this.

Advertising
This manual is related to the following products:

1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual, 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual, 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF16H E+H Instruments via HART to PlantPAx User Manual, 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF8H E+H Instruments via HART to PlantPAx User Manual

Popular Brands
Popular manuals