Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 8)

8 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Preface
The overall mission of the alliance is to provide you with proven solutions that
combine field instrumentation with fieldbus networks, such as HART,
FOUNDATION Fieldbus, and Profibus networks, with asset management
capabilities and Rockwell Automation’s system capabilities to provide a total
engineered solution.
Through preferred integration and support of increasing requirements for plant-
wide control, the alliance offers the following benefits:
• Reduced integration costs throughout engineering, commissioning, and
start-up
• Optimized plant availability and output
• Ensured product quality and consistency
• Optimized traceability to meet regulatory demands
• Predictive maintenance through intelligent instruments
For new construction, process improvements at an existing plant, or operating
cost reductions, the alliance delivers the following:
• Integration reduces risk, reduces integration costs, and protects investment
with assured interoperability. Both companies believe open systems and
standardized interfaces bring maximum benefits.
• Advanced diagnostics with plant-wide support offers better visibility of
plant health and easier access to instrument diagnostics, which leads to
faster troubleshooting and improves decision-making.
• Collaborative lifecycle management to design, engineer, and startup
systems faster. This collaboration increases productivity, manages
information about instrumentation assets, optimizes plant assets, and
results in a complete lifecycle management solution.
Application Overview This document provides a step-by-step approach to integrating Endress+Hauser
devices into a Rockwell Automation Integrated Architecture for Process Control
system.
This Section Describes
Application overview Details about the field instrument and control system.
System details Specifications on the required hardware and software components.
Installation How to:
• Connect the measurement instrument to the HART I/O module.
• Connect a HART handheld device.
Configuration How to:
• Configure the HART I/O module.
• Configure the measurement instrument and manage parameters.
Visualization How to implement and configure a graphical display of device information.