Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 82)

82 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 5 Visualization
The faceplates provide the following information:
• Tag name from instrument
• Description from instrument
• Engineering units from instrument
• Typical analog process values (PV)
• Analog fault status (channel fault, broken wire, module fault)
• HART PV (first, second, third)
• HART PV fault status (first, second, third, fourth)
• HART PV range (minimum and maximum)
• HART command 48 diagnostic information
Configure the faceplates to provide the following:
• Mode (such as operator or program)
• High-high, high, low, and low-low alarms
• Over-range and under-range alarms
• Alarm delay
• Alarm hysteresis
IMPORTANT A unique global object and faceplates are available for each field instrument
due to the display of instrument-specific diagnostic information.