Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 27)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 27
Configure the HART Device in RSLogix 5000 Programming Software Chapter 2
If HART data is not present, make sure the HART function is enabled.
Configure a HART Input
Module in a Compact I/O
System Use RSWHO Active in RSLogix 5000 software to verify that the controller,
HART input module, and devices are active.
This example has a 1769-L35E CompactLogix controller and the Spectrum
1769sc-IF4IH module and uses the Spectrum sample ACD file.