Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 53)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 53
Chapter
4
Configure the HART Device in E+H Fieldcare
Software
FieldCare is the Endress+Hauser FDT-based, plant-asset management tool for
configuring intelligent field instruments.
Configure a HART Input
Module and Device
1. Start FieldCare and open a new project.
Topic Page
Configure a HART Input Module and Device 53
Access Instrument Data 56
Additional Functions 58
IMPORTANT To optimize FieldCare performance, it is recommended that you
verify that the correct DTMs are loaded in the catalog.