Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual

Page 42

Advertising
background image

42

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014

Chapter 3

Configure the HART Device in FactoryTalk AssetCentre Software

15. Select the correct channel and click OK.

Repeat for additional channels with devices.

16. Click Scan network to locate devices.

17. Click OK.

Advertising
This manual is related to the following products:

1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual, 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual, 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF16H E+H Instruments via HART to PlantPAx User Manual, 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF8H E+H Instruments via HART to PlantPAx User Manual

Popular Brands
Popular manuals