Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 81)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 81
Visualization Chapter 5
These parameter values should appear.
8. Click OK.
9. Click the Save button at the top, left corner of the screen.
Faceplates The FactoryTalk View SE generic display provides a graphical representation of
the instrument based on the information contained within each Add-On
Instruction. Navigation buttons at the top of the faceplate change the
information displayed. Status displays show information using a bar graph,
numeric values, and a trend display. Other displays show specific alarms and
warning indication.
Here are some examples of predesigned faceplates.