Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 22)

22 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 2 Configure the HART Device in RSLogix 5000 Programming Software
To configure the I/O module, follow these steps within the configuration tree.
1. From the configuration tree, right click the 1756 backplane and choose
New Module.
If the controller communicates with the I/O module over a network, the
network interfaces must be added to the configuration tree before adding
the I/O module.
2. From the list, select the 1756-IF8H input module.