Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide - Manual (Page 103)

C-2 GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0
P.029 ELAPSED TIME METER
P.030 ELPSD TIME METER RST
P.031 PRESET SPEED 1
P.032 PRESET SPEED 2
P.033 PRESET SPEED 3
P.034 PRESET SPEED 4
P.035 PRESET SPEED 5
P.036 PRESET SPEED 6
P.037 PRESET SPEED 7
P.038 PRESET SPEED 8
P.039 ENCODER LOSS ENABLE
P.040 MOTOR OVERLOAD ENABLE
P.041 MOTOR OVERLOAD TYPE SEL
P.042 LINE DIP RIDE THRU TM
P.043 FAULT AUTO RESET COUNTS
P.044 FLT AUTO RESET TIME
P.045 OUTPUT PHASE LOSS EN
P.047 CARRIER FREQUENCY (KHZ)
P.048 REGULATION TYPE
P.049 DEFAULTS TYPE
P.050 RESTORE DFLTS
P.051 PROGRAMMING DISABLE
P.052 AUTO/MAN KEY DISABLE
P.053 MAN REF PRESET ENABLE
P.054 LEVEL SENSE START EN
P.055 STOP/RST KEY DISABLE
P.060 NETW DROP NUMBER
P.061 NETW CONNECT TYPE
P.062 NETW COM LOSS RESP
P.063 NETW NET REF SOURCE
P.064 NETW TRIM REF SOURCE
P.065 OPTION: TYPE AND VERS
P.066 OUTPUT REG 1 SOURCE
P.067 OUTPUT REG 2 SOURCE
Parameter No. Parameter Name Setting Date