Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide - Manual (Page 104)

Record of User Parameter Settings C-3
P.068 OUTPUT REG 3 SOURCE
P.069 OUTPUT REG 4 SOURCE
P.090 DIAGNOSTICS SELECT
P.091 DIAGNOSTICS DISPLY
P.095 P/M OUTPUT AMPS
P.098 SOFTWARE VERSION NUM
P.099 SELECTED P/M TYPE
H.000 MOTOR NAMEPL VOLTS
H.001 MOTOR NAMEPL BASE FRQ
H.002 MOTOR NAMEPL AMPS
H.003 TORQUE BOOST VOLTAGE
H.004 SLIP COMPENSATION
H.005 DC BRAKING ENABLE
H.006 DC BRAKING START FREQ
H.007 DC BRAKING CURRENT
H.008 DC BRAKING TIME
H.009 AVOID FREQ ENABLE
H.010 AVOID FREQ MIDPOINT 1
H.011 AVOID FREQ BAND 1
H.012 AVOID FREQ MIDPOINT 2
H.013 AVOID FREQ BAND 2
H.014 AVOID FREQ MIDPOINT 3
H.015 AVOID FREQ BAND 3
H.016 SYNC DIRECTION
H.017 INPUT PWR/SNUB CONFIG
H.018 VHZ-CURVE TYPE
H.019 IDENTIFICATION RESULT
H.020 IDENTIFICATION RQST
H.021 AC LINE VOLTAGE
H.022 OVERFREQUENCY LIMIT
U.000 TORQUE REF SOURCE
U.001 ENCODER PPR
U.002 MOTOR POLES
U.003 MOTOR NAMEPL BASE FRQ
Parameter No. Parameter Name Setting Date