B.1.11 additional parameters – Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide User Manual
Page 94
GV3000/SE OIM Menu and Parameter Organization
B-7
•
RMI DIG OUT3 DLY TIME (r.042)
•
RMI DIG OUT4 DLY TIME (r.043)
• RMI Relay Outputs
•
RMI RELAY OUTP 1 CNF (r.035)
•
RMI RELAY OUTP 2 CNF (r.036)
•
RMI RELAY OUTP 3 CNF (r.037)
•
RMI RLY OUT1 DLY TIME (r.044)
•
RMI RLY OUT2 DLY TIME (r.045)
•
RMI RLY OUT3 DLY TIME (r.046)
• RMI Speed Compare Levels
•
RMI SPEED DET LEVEL 1 (r.050)
•
RMI SPEED DET LEVEL 2 (r.051)
•
RMI SPEED DET LEVEL 3 (r.052)
•
RMI LOW SPD DET LEVEL (r.056)
•
RMI SPEED DET HYSTER (r.053)
• RMI Current Compare Levels
•
RMI CURR DET LEVEL 1 (r.057)
•
RMI CURR DET LEVEL 2 (r.058)
•
RMI CURR DET LEVEL 3 (r.059)
•
RMI CURR DET HYSTER (r.060)
• RMI Torque Compare Levels
•
RMI TRQ DET LEVEL 1 (r.063)
•
RMI TRQ DET LEVEL 2 (r.064)
•
RMI TRQ DET LEVEL 3 (r.065)
•
RMI TRQ DET HYSTER (r.066)
B.1.10 Memory Functions
•
PROGRAMMING DISABLE (P.051)
•
DEFAULTS TYPE (P.049)
•
RESTORE DEFAULTS (P.050)
B.1.11 Additional Parameters
If the OIM finds any parameters in the drive that do not correspond with those in the
OIM (for example, if the OIM and drive contain different software versions), those
parameters will be listed in this menu.