Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide User Manual
Page 33
Advertising
Basics of Programming the Drive Using the OIM
4-3
The Main Menu help screen is shown in figure 4.2.
In a menu, help gives an overview of the options available in the menu. An example of
the Speed Control menu help is shown in figure 4.3.
In a parameter entry screen, the help screen gives you the parameter name, number,
type, and units of measure of the parameter. An example of a parameter help screen
is shown in figure 4.4.
In the help screen shown in figure 4.4:
•
The name of the parameter is MAXIMUM SPEED.
•
The parameter number is P.004.
Figure 4.2 – Main Menu Help Screen
Figure 4.3 – Example of the Speed Control Menu Help Screen
Figure 4.4 – Example of a Parameter Help Screen
Advertising