Rockwell Automation GV3000/SE Operator Interface Module (OIM) User Guide - Manual (Page 105)

C-4 GV3000/SE Operator Interface Module (OIM) User Guide, Version 2.0
U.004 MOTOR NAMEPL AMPS
U.005 MOTOR NAMEPL RPM
U.006 MAGNET CURRENT PRCNT
U.007 MOTOR NAMEPL VOLTS
U.008 TORQUE SELF-TUNE EN
U.009 TORQUE SELF-TUNE RSLT
U.012 SPEED REG PROP GAIN
U.013 SPEED REG INT GAIN
U.014 TORQUE REG PROP GAIN
U.015 TORQUE REG INT GAIN
U.016 FLD-WEAKEN START RPM
U.017 MOTOR TOP SPEED
U.018 AC LINE VOLTAGE
U.019 FLX CUR REG PROP GAIN
U.020 FLX CUR REG INT GAIN
U.021 ROTOR TIME CONSTANT
U.022 MOTOR NAMEPL HP
U.023 LOW BUS FLT AVOID EN
U.024 HIGH BUS FLT AVOID EN
U.025 ZERO SPEED HOLD TIME
U.026 CURRENT COMPOUND GAIN
U.027 INERTIA COMP GAIN
U.028 LOSSES COMP GAIN
U.030 SVC SLIP ADJUST
U.031 SVC SYNC DIRECTION
U.032 SVC FLUX REG GAIN
U.040 OCL FEEDBACK SOURCE
U.041 OCL LEAD/LAG SELECT
U.042 OCL LEAD/LAG LOW FREQ
U.043 OCL LEAD/LAG RATIO
U.044 OCL REFERENCE GAIN
U.045 OCL PROPORTIONAL GAIN
U.046 OCL INTEGRAL GAIN
U.047 OCL TRIM RANGE PERCNT
Parameter No. Parameter Name Setting Date