Side sensor not detecting targets, continued – Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING User Manual
Page 102
Advertising
Symptom Isolation Procedures
3-5
Side Sensor Not Detecting Targets, continued
Step C
Procedure
Condition
Action
1. Key on.
2. Disconnect 4-way connector at
the Side Sensor Display.
3. Key on.
4. Measure voltage
between pins 2 and 3.
If voltage between pins 2
and 3 is 7.0 to 7.5 volts
If voltage is outside of range
Go to Step D.
Go to Step E.
4 3 2 1
V
A
COM
Advertising