Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING - Manual (Page 54)

Fault Isolation Procedures
2-43
Component Code: 16
(SID 11, FMI 2)
Left Side Sensor
Overview
This fault code indicates an electrical failure of the Left Side Sensor.
Detection
Starting at key on and throughout the operation, the Central
Processing Unit constantly monitors the feedback from the Left
Side Sensor.
Fallback
This fault will not allow the Bendix ™ VORAD ® system to detect
objects on the left side of the vehicle.
Required Tools
• Basic Hand Tools
• Digital Volt/Ohm Meter
• Troubleshooting Guide
• PC-based or Hand-held Diagnostic Tool
Possible Causes
This fault code can be caused by any of the following:
• Wiring Harness
• Left Side Sensor
• Central Processing Unit
• System Confi guration
Harness
Left
Side Sensor
Central
Processing Unit