Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING - Manual (Page 84)

Fault Isolation Procedures
2-73
Code 25, 32 (SID 231, FMI 2, 12, 14) J-1939 and Cruise Signal Error, continued
Step V Procedure Condition Action
1. Key off.
2. Reconnect all connectors.
3. Key on.
4. Clear Codes. See “Fault Code
Retrieval and Clearing” on page
1 - 2.
5. Use Driving Techniques to attempt
to reset the code. See “Driving
Techniques” on page 1 - 4.
6. Check for Codes. See
“Fault Code Retrieval and
Clearing” on page 1 - 2.
If no codes appear
If code 25 appears
If code other than 25 appears
Test complete.
Return to Step A to fi nd
error in testing.
See “Fault Code Isolation
Procedure Index” on page 1 - 3.