Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING - Manual (Page 48)

Fault Isolation Procedures
2-37
Component Code: 15
(SID 10, FMI 2)
Right Side Sensor
Overview
This fault code indicates an electrical failure of the Right Side
Sensor.
Detection
Starting at key on and throughout the operation, the Central
Processing Unit constantly monitors the feedback from the Right
Side Sensor.
Fallback
This fault will not allow the Bendix ™ VORAD ® system to detect
objects on the right side of the vehicle.
Required Tools
• Basic Hand Tools
• Digital Volt/Ohm Meter
• Troubleshooting Guide
• PC-based or Hand-held Diagnostic Tool
Possible Causes
This fault code can be caused by any of the following:
• Wiring Harness
• Right Side Sensor
• Central Processing Unit
• System Confi guration
Harness
Right
Side Sensor
Central
Processing Unit