Power-up sequence test, continued – Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING User Manual
Page 27
Advertising
Fault Isolation Procedures
P
ow
er
-Up Sequence T
est
2-16
Power-Up Sequence Test, continued
Step L
Procedure
Condition
Action
1. Key off.
2. Connect spare Driver
Display to 4-way
connector.
3. Key on.
4. Check error codes.
If no error codes
If error codes
Replace Driver Display Unit.
Go to Step V.
Go to Step A.
Find error in testing.
Advertising