Bendix Commercial Vehicle Systems VORAD EVT-300 TROUBLESHOOTING User Manual
Page 38
Advertising
Fault Isolation Procedures
2-27
Code 13, 34 (SID 9, FMI 2, 4, 5, 12) Driver Display Unit, continued
Step G
Procedure
Condition
Action
1. Key off.
2. Reconnect Central Processing
Unit 32-way connector.
3. Connect spare Driver
Display to 4-way
connector.
4. Key on.
5. Check error codes.
If no error codes
If error codes
Replace Driver Display Unit.
Go to Step V.
Replace Central Processing
Unit. Go to Step V.
Advertising