Metrohm 815 Robotic Soliprep for LC User Manual
Page 13
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Installation
815 Robotic Soliprep for LC
■■■■■■■■
7
1 Connect the Swing Head with reinforcement to tower 1 (on the right),
the Swing Head without reinforcement to tower 2 (on the left).
The connector is located in each case on the rear of a tower.
The Swing Heads can be laid down flat, but not with the drive disc facing
downward.
Connecting the controller cable
1 Connect the 6.2151.000 controller cable to the rear of the instrument.
Advertising