Metrohm 815 Robotic Soliprep for LC User Manual
Page 20
Advertising
2.4 Mounting the Swing Heads
■■■■■■■■■■■■■■■■■■■■■■
14
■■■■■■■■
815 Robotic Soliprep for LC
Removing the titration head holders
1
1
2
1 Release both the outside and the inside holder screws on tower 2 (left).
2 Loosen and remove the holder from the holder plate of the guide chain.
3 Remove the holder from tower 1 as well.
Use the hexagon key provided. The screws will be needed again later.
Advertising