Metrohm 815 Robotic Soliprep for LC - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
815 Robotic Soliprep for LC ￭￭￭￭￭￭￭￭ 15
Mounting the Swing Heads
1
2
1 Screw the Swing Head without reinforcement tightly to the holder plate
of the guide chain on tower 2 with two V.024.4012 countersunk
screws.
2 Clamp the Swing Head between the guide jaws and screw it tightly.
3 Screw the second Swing Head (with reinforcement) tightly to the holder
plate of the guide chain on tower 1 with two V.024.4012 countersunk
screws.
4 Clamp the Swing Head between the guide jaws and screw tight the
two screws on the left-hand side.
6.2058.040
4
5