Metrohm 815 Robotic Soliprep for LC - Manual (Page 60)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭ 815 Robotic Soliprep for LC
6 Controlling the Polytron
®
Configuration
Once the Polytron has been set up, it can be configured in MagIC Net.
Configuring the Polytron
1 Click the Configuration icon.
2 Click on [Edit] in the Devices window.
3 Select the entry New… in the pull-down menu and then, in the device
selection under Miscellaneous, set up a new RS232 device.
4 Enter a device name and the device serial number of the Polytron under
General.
5 Enter the following settings in the dialog window RS 232:
￭ COM Port COM1 (or the interface on the PC at which you have
connected the Polytron)
￭ Baud rate 2400
￭ Data bit 8
￭ Parity None
￭ Stop bit 1