Metrohm 815 Robotic Soliprep for LC User Manual
Page 19
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Installation
815 Robotic Soliprep for LC
■■■■■■■■
13
2 Under Device selection, first select All devices and then the 815
Robotic USB .... Click the tab Tower 1.
3 Moving the lift into position
Under Rack position, click on [Start].
The sample rack moves to a defined position. Now the lift can be
moved.
4 Under Lift position, click on the arrow button "down" until the lift 1
has moved approx. 180 mm downwards.
The two lifts are now in a favorable position permitting easy access to
all of the screws for mounting the Swing Heads.
Advertising