Metrohm 815 Robotic Soliprep for LC - Manual (Page 30)

2.8 Washing station and drip pan ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24 ￭￭￭￭￭￭￭￭ 815 Robotic Soliprep for LC
2.8 Washing station and drip pan
To mount the washing station and the drip pan, remove the sample rack.
Now proceed as follows:
1 Mount the washing station to the left next to tower 2 on the assembly
rail and screw it tightly.
2 Fasten the enclosed tubing to the drainage nipple on the drip pan and
guide the free end of the tubing into a drain or a waste container.
3 Place the drip pan over the stirrer rail. The correct alignment of the drip
pan can be seen from the following illustration. Correct the position of
the washing station slightly as needed.
4 Reattach the sample rack.