Metrohm 815 Robotic Soliprep for LC - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
815 Robotic Soliprep for LC ￭￭￭￭￭￭￭￭ 33
3
4
4 Screw the safety shield tightly with the two nuts as shown in the fol-
lowing illustration.
5 Adjust the safety shield on the spacer, see the following figure.
5
2.16 Installing the Dosino
For the transferring and diluting of the sample, two Dosinos with a 10 mL
and a 50 mL dosing unit is used. They are being installed as follows: