Metrohm 815 Robotic Soliprep for LC User Manual
Page 55
■■■■■■■■■■■■■■■■■■■■■■
5 Setting lift positions
815 Robotic Soliprep for LC
■■■■■■■■
49
11 Click on the associated [Assign] button.
12 Click on [Close].
External position 2
1 Under Robotic arm position actuate the button [Arrow right] until
the Luer adapter is standing to the right. It should now be located in
the of the deflector opening.
2 Move the lift upward (arrow button [Arrow up]) until the needle or
the filter is stripped off and falls into the collection container. Do not
move the lift too far upward.
3 Under Robotic arm position select External position 2.
4 Click on [Configure rack].
5 Under Lift position select the Work position for External 2.
6 Click on the associated [Assign] button.
7 Click on [Close].
8 Move the lift to the Shift position.