Metrohm 815 Robotic Soliprep for LC User Manual
Page 33
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Installation
815 Robotic Soliprep for LC
■■■■■■■■
27
5
5 Apply pressure to the pressure clamp and clamp tightly with the fixing
lever. Tighten the set screw to an extent sufficient to ensure that the
pump tubing is unable to shift position. The flow rate of the pump can
be regulated later with the set screw while the pump is running .
6 Connect the connection cable of the pump to tower 2. The instrument
must be switched off thereby.
Advertising