Metrohm 815 Robotic Soliprep for LC - Manual (Page 35)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
815 Robotic Soliprep for LC ￭￭￭￭￭￭￭￭ 29
1 Open the guide chain
￭ Insert a screwdriver into the groove located on the side of a chain
link.
￭ Loosen the clip with a forceful leverage movement.
￭ Pull the clip out of the chain by hand.
￭ Repeat the above actions for each chain link.
2 Insert into the guide chain
￭ Place the required tubings and cables into the guide chain.
3 Close the guide chain
￭ Close the clip for each chain link again by hand and apply forceful
pressure to snap them into place.
Caution
Take care to ensure that any cables and tubings that are fixed in the guide
chain are not able to hinder the free movement of the lift or of the robotic
arm. This could lead to damage to the affected drive.
The clip of one chain link can be removed entirely if required by releasing it
on both sides.