Metrohm 864 Robotic Balance Sample Processor - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Overview of the instrument
864 Robotic Balance Sample Processor ￭￭￭￭￭￭￭￭ 9
5 Connector for a robotic arm sensor
Only necessary when using a robotic arm
with beaker sensor. 6 786 Swing Head (2.786.0040)
Drive for a 6.1462.XXX robotic arm.
7 Guide chain
For tubings and cables. 8 786 Swing Head (2.786.0140)
With reinforcement plate.
9 Robotic arm reinforcement
(6.2058.040) 10 Lift 1 with tower extension
(6.2058.010)
11 Fastening plate (6.2058.050)
For mounting the deflector.
12 Fastening screws for a retaining plate
Only necessary when using piercing needles.
13 Beaker sensor
For the recognition of a sample vessel.
14 Assembly rail
For mounting a rinsing station and other
accessories.
15 Housing
With recesses for mounting a balance.
1
2
3
4
5
Figure 2 Rear 864 Robotic Balance Sample Processor
1 Warning symbols
(see Chapter 1.3.4, page 5) 2 Pump connectors
With threaded plug, for external pumps.