Metrohm 864 Robotic Balance Sample Processor - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
864 Robotic Balance Sample Processor ￭￭￭￭￭￭￭￭ 45
1
2
Figure 30 Installing the drip pan
1 Attach the drip pan
￭ Place the drip pan on the assembly rail of the turntable in such a
way that the opening in the bottom of the pan can be guided
over the weighing column of the balance, see illustration.
2 Attach the weighing plunger
￭ Provisionally screw the weighing plunger of the balance on the
weighing column at the lowest possible position.