Metrohm 864 Robotic Balance Sample Processor - Manual (Page 63)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
864 Robotic Balance Sample Processor ￭￭￭￭￭￭￭￭ 55
3.19 Adjusting the lift positions
Fine adjustment
Some lift positions must be adjusted precisely in order to ensure a perfect
automation sequence. Use the manual control of the instrument for this
purpose. The following section describes how you can approach the indi-
vidual positions and adjust them as needed.
1 Open the manual control
￭ In the sidebar of tiamo ™, click the hand symbol.
￭ In the left-hand window, under 864_1 (864 Balance …, click
the item Tower 1 and then select the Move tab.
Lift position for picking up pipetting tips
1 Move to position
￭ Under Rack position, enter Target position 21 and click
[Start].
￭ Place a pipetting tip on the position moved to.