Metrohm 864 Robotic Balance Sample Processor - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
864 Robotic Balance Sample Processor ￭￭￭￭￭￭￭￭ 21
Tower 1
1 Open the robotic arm configuration
￭ Click the Configuration icon.
￭ Double-click the instrument name 864_1 in the Devices win-
dow.
￭ In the properties window of the 864 Robotic Balance Sample Pro-
cessor under Tower 1, open the configuration of the Swing
Head.
2 Enter the configuration data
￭ Enter the following data:
– Swing offset –8.6°
– Maximum swing range 122°
– Swing radius 149.8 mm
– Rotation offset 0.0°
– Swing direction –
￭ Close the configuration window with [OK].
Tower 2
1 Open the robotic arm configuration
￭ In the properties window of the 864 Robotic Balance Sample Pro-
cessor under Tower 2, open the configuration of the Swing
Head.