Metrohm 864 Robotic Balance Sample Processor User Manual
Page 42
Advertising
3.10 Equipping the titration head
■■■■■■■■■■■■■■■■■■■■■■
34
■■■■■■■■
864 Robotic Balance Sample Processor
Inserting the stirrer and the electrode, connecting the dos-
ing tubings
1
2
3
4
1.802.0010
6.1909.050
6.2104.030
6.1236.020
6.0229.100
6.1805.120
The equipment of the titration head is completed as follows:
1 Insert the rod stirrer
■
Insert the rod stirrer (802 Stirrer) into the rear opening of the
titration head (at the arrow).
■
Insert the cable into the guide chain.
2 Mount the stirring propeller
■
Fasten the 6.1909.050 stirring propeller to the rod stirrer from
below.
3 Insert the electrode
■
Insert the electrode (6.0229.100 Solvotrode) with a
6.1236.020 SGJ sleeve into the titration head.
Advertising