4 selection of the mode, key <mode – Metrohm 787 KF Titrino User Manual
Page 22
Advertising
2.4. Selection of the mode, key <MODE>
787 KF Titrino
18
2.4 Selection of the mode, key <MODE>
Press key <MODE> until the desired mode is
displayed and confirm with <ENTER>.
The following modes can be selected:
• KFT:
Karl Fischer titration
• TITER with H2O or std.:
Titer determination with water or water-containing
standard.
• TITER with Na2Tart*2H2O:
titer determination with sodium tartrate.
• BLANK determination:
determination of the blank value
The set values under the <CONFIG> and <PARAM>
keys apply to all modes, whereas the calculations differ
for each mode. Once values have been set they remain
effective even if the instrument is switched off.
MODE
–
Advertising