Metrohm 787 KF Titrino User Manual
Page 29
2.6 Parameters, key <PARAM>
787 KF Titrino
25
Titration sequence of KFT
If conditioning is on, the sample solution is titrated until
the EP is reached. The display shows then
KFT conditioning
The vessel is now conditioned. The titration can be started
with <START>.
The sample size ant the sample identification are re-
quested.
The start volume is dispensed.
The titration is executed. If the extraction time is not yet
over when the endpoint has been reached, the titration will
only be terminated after the extraction time is over.
Calculations are carried out.
Data are outputted.
Conditioning is carried out.
<START>
(Start volume)
(Request smpl size)
(Request ident.)
(Extraction time)
Titration with test of
stop criterion
Calculations
Data output
(Reconditioning)
(Preconditioning)
(<START>