Metrohm 787 KF Titrino User Manual
Page 60
Advertising
4.1. Setting up and connecting the instruments
787 KF Titrino
56
The weight is transferred as a number with up to 6 digits, sign and
decimal point. Units and control characters sent by the balance are
not transmitted.
With the aid of a special input unit supplied by the balance manufac-
turer, in addition to the weight an identification can be inputted from
the balance. For this, the address of the identification must be
preselected on the input unit.
Balance Id
Sartorius
ID.1 or 26
Mettler (AT)
C (ID#1)
If the balance works only with 7 bit and the printer with 8 bit and if
they are at the same Titrino, the balance has to bet to "space parity"
and Titrino/printer to 8 bit, "no parity".
Advertising