B&G H2000 Pilot *DISCONTINUED* - Manual (Page 130)

HB-0844-04
5-13
5.6.5 Re-configuring 20/20 Display
In addition to the 14 pre-set functions, any one of the 20/20 Displays may be
re-configured to show any other function available to the system. This feature
allows any 20/20 to be set-up to show the information most useful to the user
at that station in the yacht.
The procedure for re-configuring a 20/20 function is as follows:
(1) At the FFD, press and hold down the Page Key for at least 3
seconds. The FFD will change to show the function displayed on the
20/20 together with the display number.
(2) Using the Scroll Down Key, cycle through the 20/20 numbers
and select the one required.
(3) Using the Scroll Up Key select the function you wish to change.
(4) Press the Enter Key and the function currently being displayed
on the 20/20 will start to flash.
(5) Press and hold down the Scroll Up Key and cycle through the
normal FFD Menu until the required function choice is displayed
(e.g. NAVIGATE).
(6) Press and hold down the Scroll Down Key until the required
operational choice is displayed (e.g. COURSE).
(7) Press the Enter Key to accept the selection.
(8) Press the Page Key and the FFD will return to normal operation
and the 20/20 displays the newly configured page.
Note
Latitude and Longitude are not available on a 20/20 Display.