B&G H2000 Pilot *DISCONTINUED* - Manual (Page 33)

HB-0844-04
2-14
2.5.3 NAV Key Configuration
Our second example is configuring the NAV key. The NAV key allows the
user to select either Rhumb Line or Great Circle navigation information to be
displayed. To select the required mode, proceed as follows:
(1) Press the Page Key once.
(2) Press Scroll Up until the upper display shows CNFG DSP
flashing.
(3) Press Enter, the upper text now shows PAGE flashing.
(4) Press Scroll Up to select either NAV MODE GC (Great Circle)
or NAV MODE RH (Rhumb).
(5) Press Enter to select your desired choice. The display will
stop flashing.
2.5.4
Damping Adjustment - Boat Speed
Our third example is the entry of a damping value. To find out if it is possible
to damp a function, refer to OPERATING Menu choices, Table 1.2.
(1) Using the Scroll Up or Scroll Down Key select the upper or
lower display as required.
(2) If BOAT SPD is in the upper display press and hold Scroll
Down and scroll to DAMPING which flashes. If BOAT SPD is in the
lower display use Scroll Up.
(3) Press Enter and the current damping value will be displayed
on the upper or lower display as appropriate.
(4) Press Enter and DAMPING value will start to flash.
(5) Press Scroll Up or Scroll Down to increase and/or decrease
the damping value as required.
(6) Press Enter to accept new value.
(7) Press Page to return to full display.