B&G H2000 Pilot *DISCONTINUED* - Manual (Page 39)

HB-0844-04
2-20
The letters MS (Minutes/Seconds) and NM (Nautical Miles) mean the
function is running.
The letters RE stand for RESET, where the function is zeroed and
waiting to be started.
The letters FR stand for FROZEN, where the displayed value is
frozen, but the function is still counting in the background.
2.8.1 Fast Reset
The Hydra 2000 System incorporates a Fast Reset feature for all trip
functions (Trip Log, Timer and Barometric Pressure Trend). Fast Reset can
be initiated either by operation of a Remote Push-Button (see Para 2.1.9) or
by operation of the Enter Key on any FFD.
Note
If two trip functions are displayed at the same time, the Fast Reset facility will
only reset the function shown in the upper display.
2.8.2
Reset Timer
The options for the TIMER function are as follows:
START 0 - for count up
START 5)
START 10) - for countdown from appropriate time.
START 15)
(1) Using the Scroll Up or Scroll Down Keys select the upper or
lower display as required.
(2) If the upper display is selected use the Scroll Up Key to select
TIMER in the upper display. If the lower display is selected, use
Scroll Down.
(3) Press Enter the text now shows START 10 flashing.
(4) When the 10 minute gun sounds, press Enter. The display
now shows the timer counting down from 10 minutes and the
START 5 is flashing. If it is required to correct the timer at the 5
minute gun then this is achieved by pressing Enter again at the 5