B&G H2000 Pilot *DISCONTINUED* - Manual (Page 71)

HB-0844-04
3-6
3.2.4 Log AUTO CAL Facility
This facility enables the user to calibrate the yacht's log accurately and
simply as all calculations are performed internally by the Main Processor.
Referring to the Fig 3.1, A and B are the two markers for each run and X is
the actual distance for each run as ascertained from the chart.
Fig 3.1 - Log Calibration Runs
The user is required to enter the distance X in nautical miles (CAL DIST) and
then, as the yacht passes marks A and B on each run, to instruct the system
to start (STRT RUN) and stop (STOP RUN) and finally to end calibration
(END CAL) after the last required run is complete.
Note
The calibration process can be cancelled at any time during the operation by
pressing the Page Key if the operator is not satisfied with the calibration runs
underway, e.g., hampered by another vessel or wash, etc.