B&G H2000 Pilot *DISCONTINUED* - Manual (Page 133)

HB-0844-04
5-16
5.7.5 Re-configuring the 40/40 Display
In addition to the 14 pre-set functions, any 40/40 pre-set function may be re-
configured to show any other function available to the system. This feature
allows any 40/40 to be set-up to show the information most useful to the user
at that station in the yacht.
The procedure for re-configuring a 40/40 function is as follows:
(1) At the FFD, press and hold down the Page Key for at least 3
seconds. The FFD will change to show the function displayed on the
40/40 together with the display number.
(2) Using the Scroll Down Key, cycle through each 40/40 display
in turn (display flashes) and stop at your desired choice.
(3) Using the Scroll Up Key select the function you wish to change.
(4) Press the Enter Key and the function currently being displayed
on the 40/40 will start to flash.
(5) Press and hold the Scroll Up Key and cycle through the normal
FFD Menu until the required function choice is displayed (e.g.
NAVIGATE).
(6) Press and hold the Scroll Down Key until the required
operational choice is displayed (e.g. COURSE).
(7) Press the Enter Key to accept the selection.
(8) Press the Page Key and the FFD will resume normal operation
and the 40/40 displays the newly configured page.