B&G H2000 Pilot *DISCONTINUED* User Manual
Page 44
HB-0844-04
2-25
Notes
1. Requires pressure sensor.
2. Offset calibration available.
This is essential for the Offshore Sailor, giving not only the instantaneous
barometric value but also the important trends towards higher or lower
pressure. This helps position you in a weather system and so predict the
next change.
After installation it is essential that the calibration (CAL VAL1) of the pressure
sensor is checked against an accurate barometer and adjusted accordingly.
To select CAL VAL1 for calibration proceed as follows:
MISC
→
BAROMETER, CALBRATE
→
→ CAL VAL1
2.11.6 Barometric Pressure Trend
Menu Heading:
MISC
Function Text:
PR TREND
Update Rate:
Once per second
Units:
Millibars
This shows the change in pressure over a period of time that can be set for
up to 24 hours. The period can be changed by selecting a control option in
the OPERATION Menu using the following sequence:
MISC
→
PR TREND, CONTROL
→
→ PERIOD
A reset facility at the same menu level is also provided. This is selected
using the following sequence:
MISC
→
PR TREND, CONTROL
→
→ RESET
This operation resets the data collected to zero.
2.11.7 Battery Voltage
Menu Heading:
MOTOR
Function Text:
VOLTS